|
|
Ceramic Christmas Tree Light Kits
Need to illuminate your Ceramic Christmas Tree? Not a problem, Dogwood Ceramic Supply sells a complete selection of Ceramic Christmas Tree Light Kits to illuminate nearly every size of Ceramic Christmas Tree.
The Ceramic Christmas Tree Light Kits, also known as Ceramic Christmas Tree Electrical Lighting Kits are available in 4 sizes: Small, Medium, Large and Dual Bulb Extra Large.
Use the small tree kit only for the smallest Ceramic Christmas Trees. The Medium Tree kit for the standard 9 to 12" Ceramic Christmas Trees.
The Large kit should be used for all standard one-piece Ceramic Christmas Trees from 12" and larger. The Dual Bulb Extra Large Tree Kit should only be used
for Ceramic Christmas Trees that have two or more add-on branch ring sets added to the basic tree
to increase the overall height of tree to well more than 18" (not counting the base).
All Light Kits requires one ¼" hole in the Christmas Tree base for the cord set to run through to the exterior, and ½" hole at the top of the Christmas Tree Base for mounting the light kit using the brass nipple.
| Small Tree Kit | ||||
 |
Candelabra Socket with 7-½W Clear, Steady-Burning Bulb. 6' White Cord Set with polarized molded end plug and wheel-type on/off switch. Locknut, 1" brass nipple and vinyl washers for mounting in tree base. |
$7.50 |
| Medium Tree Kit | ||||
Medium Tree Kit uses a longer bulb than shown |
Candelabra Socket with 25W 3" Tubular Clear, Steady-Burning Bulb. 6' White Cord Set with polarized molded end plug and wheel-type on/off switch. Locknut, 1" brass nipple and vinyl washers for mounting in tree base. |
$8.00 |
| Large Tree Kit | ||||
 |
Edison (Medium) Standard Socket with 40W 5½" Tubular Clear, Steady-Burning Bulb. 6' White Cord Set with polarized molded end plug and wheel-type on/off switch. Locknut, 1" brass nipple and vinyl washers for mounting in tree base. |
$9.50 |
| Dual Bulb Large Kit | ||||
 |
2) Edison (Medium) Standard Sockets with 2) 25W 5½" Tubular Clear, Steady-Burning Bulbs 6' White Cord Set with polarized molded end plug and wheel-type on/off switch. Locknut, 1" brass nipple and vinyl washers for mounting in tree base. Extension Rod for elevating bulb set into the tree. 14" Clearance required for installation. Avoid overheating confined spaces. |
$13.00 |
| These are electrical products, not toys. To avoid risk of fire, burns, electrical shock or other injury, install correctly, do not exceed ratings and do not place where small children can reach them. For indoor use only. Use the proper size electrical lighting kit for the item. |
All height measurements are based upon the total height of the tree and the base.
Please note, the low cost Dual Bulb Large Tree Kit replaced the Extra Large Tree Kit for use with the largest Ceramic Christmas Trees. The Extra
Large Tree Kit used a nearly 12" bulb and the basic Edison (standard) socket. Dogwood Ceramic Supply continues to offer the Extra Long Bulb as an replacement
option. Do not use the Extra Long Bulb or the Dual Bulb Kit in confined spaces so as to prevent overheating and premature bulb failure.
The Extra Long Bulb may also be used with the Dual Bulb Large Tree Kit to improve
the light distribution in the extremely large ceramic Christmas Trees.
 |
25w 5½" Replacement Bulb, Edison socket | $2.50 | |
|
40w 5½" Replacement Bulb, Edison socket | $2.50 | |
 |
40w 11¾" Replacement Bulb, Edison socket | $13.00 |
|
Simple UPS Shipping Rates for Christmas Tree Light Kits: Commercial locations and Schools via UPS $7.50 The Simplified UPS Rates include all applicable fees including an allowance for the fuel surcharge.
The simplified rate applies to orders of any combination of electrical kits, bulbs and stars up to $50
Larger orders are billed actual UPS charges. |
Suggested Bulb, Star and Electrical Kits
| Tree Height (includes base) |
Plastic Bulb Size | Star Size | Electrical Kit |
| 7" | Large Pin Lights | None or Small | Small Tree |
| 8¼" | Large Pin Lights | None or Small | Small Tree |
| 9½" | Large Pin Lights | Small | Medium Tree |
| 11" | Small Twist | Small | Medium Tree |
| 14" | Medium Twist | Medium | Large Tree |
| 16" | Medium Twist | Large | Large Tree |
Plastic Ceramic Christmas Tree Bulbs
Dogwood Ceramic Supply also offers a number of (undecorated) different sized ceramic bases for a variety of Ceramic Christmas Trees. We need to know the diameter of the hole at the bottom of your tree to determine the best base for your particular tree.
For Bisque Ceramic Christmas for the do-it-your-selfers please refer to Ceramic Christmas Trees.
12590 Dedeaux Road
Gulfport Mississippi, 39503
Telephone (228) 831-4848 Fax (228)
831-3111
Showroom Business Hours:
Monday, Tuesday, Friday and Saturday 10AM to 5PM
Thursday 1PM to 6PM
Closed Wednesday and Sunday
Electrical lighting kits of varying sizes to illuminate the classic ceramic Christmas Trees.