Paragon Catalog Home

Paragon Janus 1613

The Personal Kiln for Glass and Pottery

List Price $1495.00

Dogwood Ceramic Supply's Discounted Price $1020.00

    The compact sized Paragon Janus 1613 is perfect for the home artist that desires to slump and fuse glass as well as fire pottery up to Cone 10.  The full featured Janus 1613 is the smallest sized kiln in the Janus series and is based upon the popular TnF 1613-3.  Like the TnF 1613-3, the Janus 1613-3 is perfect for the artist that works on a smaller scale or for firing single pieces per load.

Dogwood Ceramic Supply stocks the Paragon Janus 1613
             

Paragon Janus 1613 Kiln:

• Cone 10, 2350°F
• 1.7 cubic foot interior: 16 ½" wide x 13 ¼" deep
• 3" insulating firebrick on lid, bottom and walls
• 2" Blank top brick is blank to protect elements from user contact
• Paragon's spring loaded counter balanced LiteLid for ease of opening the heavy brick lid
• Reversible brick bottom
• Full-formed galvanized steel base plate to reinforce the brick bottom
• Dust-free coating in the peepholes, both sides of the lid and the top rim of the wall bricks
• Proportional power elements in deep recessed brick groves for even heating
• One piece construction with hand lifts.
• Digital controller mounted at the top of the control panel for ease of viewing and programming
• Basic operating instructions silk screened on control panel
• Heavy duty kiln stand accommodates the Orton KilnVent
• Sentry 2.0 12-Key Digital Controller with programmed cool-down and full range of user programmable firing options
• Lid Element for glass firing
• Janus toggle switch to convert kiln from pottery (ceramic) firing to glass firing modes
• 4,800 watts of power.  Requires #12 wire, 20 amp circuit breaker, NEMA 6-20R receptacle
• Single Zone K Type Thermocouple temperature sensor and control
• Available in 200, 208, 220, 240, 480v, 1 & 3 phase power options
• Doorway clearance required is 26"
• Shipping weight 171 lbs.

Paragon Janus 1613 Kiln Options:

• Furniture Kit
  • 2 C-18 Shelves (15" round x 5/8" thick)
  • 1 C-18H 1/2 Shelf (15" Half round x 5/8" thick)
  • 1” wide Square Posts, 4 of each: ½”, 1”, 2”, 3”, 4”, 6” lengths
  • 1 lb. Bag Kiln Wash
  • Furniture Kit Shipping Weight: 28 lbs.
• Lid Safety Switch
• Deluxe stand on casters
• Orton Vent Master down draft ventilation system
• Auxiliary Output to control Orton KilnVent
• S Type Thermocouple temperature sensor and control
• APM Elements
• Mercury Relays

Prices valid until December 31, 2008.

Prices:
    $1495.00 is the Manufacturer's Suggested Retail Price.  Dogwood Ceramic Supply's discounted price is $1020.00 

    All options have appropriate discounts applied from the MSRP.

    Freight charges are based upon the customer's location.  Please refer to Paragon freight information for complete information including special rates and any adjustments to the basic freight charges for your specific location.  The standard freight charges includes Liftgate service, the furniture kit and most common accessories that may be added to a kiln purchase.

    For kilns shipped without the matching furniture kit the freight charges must be hand computed and are typically $30 to $80 higher than the published freight rates.

Liftgate delivery is always included in the shipping costs for kilns that are drop shipped from the Paragon factory.

Call for prices on multiple kiln purchases

    The Janus 1613 is stocked by Dogwood Ceramic Supply for over the counter purchase by local and regional customers.  The shipping crate is approximately 30"w x 35"d x 33"h.  The kiln will fit into every SUV or vans. The in-store price ($1125.00) is slightly higher than the drop shipped price due to warehouse and handling costs, however there are no freight charges for over the counter purchases from The Showroom inventory.  The price of the accessories remains the same as the drop ship prices.

Explanation of Options for Round Kilns