Paragon Catalog Home

Paragon Ovation-10

The Big Oval Glass Fusing Kiln

List Price $2420.00

Dogwood Ceramic Supply's Discounted Price $1640.00

    The Paragon Ovation-10 is the largest production glass kiln in the Fusion Series of Kilns from Paragon. The Fusion Kilns from Paragon were designed for glass fusing and slumping.  The Paragon Ovation-10 is a traditional oval or bathtub design kiln that is wide enough to handle several large platters side by side in a single firing.  Physically the Paragon Ovation-10 is a 10 sided kiln with an elongated firing chamber with rounded ends that is 41" long x 22½" deep x 11" high and uses two elements in lid of the kiln in element grooves that are smaller than the element to prevent element drooping without the use of element pins.  The Ovation-10 comes standard with the Sentry 2.0 12-Key Digital Controller for greater control of the firing and 3" standard kiln bricks are used in the walls, floor and lid for slower cooling of large glass projects.  Dual Litelids, Paragon's spring loaded counter balanced lid assist, are used to reduce stress on the heavy lid and minimize the potential for damage.  Because of the oval shape the Ovation-10 cannot be equipped with the Ceramic Fiber Top.

Paragon Ovation-10 Kiln:

• Glass kiln, 1700°F maximum temperature
• 5.2 cubic foot interior: 41" long x 22½" deep x 11" high
• 3" insulating firebrick on bottom, walls and lid
• 3" insulating firebricks on lid
• Dual version of Paragon's spring loaded counter balanced LiteLid for ease of opening the heavy brick lid
• Reversible brick bottom
• Full-formed galvanized steel base plate to reinforce the brick bottom
• One piece construction, with hand lifts
• Sentry 2.0 12-Key Digital Controller with programmed cool-down and full range of user programmable firing options
• 7,200 watts of power.  Requires #8 wire, 40 amp circuit breaker, NEMA 6-30R receptacle
• Single Zone K Type Thermocouple temperature sensor and control
• Available in 200, 208, 220, 240, 480v, 1 & 3 phase power options
• Doorway clearance required is 39½"
• Shipping weight 402 lbs.

Paragon Ovation-10 Options:

• Furniture Kit
  • 1 C-20 Shelf (20" x 20" x 5/8" thick)
  • 2 20" Half Round Shelves
  • 1” wide Square Posts, 12 of each: ½" length
  • 1 lb. Bag Glass Separator
• Lid Safety Switch
• Glass Window (2)
• Orton Vent Master down draft ventilation system
• Auxiliary Output to control Orton KilnVent
• S Type Thermocouple temperature sensor and control
• Mercury Relay
• APM Elements

Prices valid until December 31, 2008.

Prices:
    $2420.00 is the Manufacturer's Suggested Retail Price.  Dogwood Ceramic Supply's discounted price is $1640.00 

All options have appropriate discounts applied from the MSRP.

    Freight charges are based upon the customer's location.  Please refer to Paragon freight information for complete information including special rates and any adjustments to the basic freight charges for your specific location.  The standard freight charges includes Liftgate service, the furniture kit and most common accessories that may be added to a kiln purchase.

    For kilns shipped without the matching furniture kit the freight charges must be hand computed and are typically $30 to $80 higher than the published freight rates.

Liftgate delivery is always included in the shipping costs for kilns that are drop shipped from the Paragon factory.

Call for prices on multiple kiln purchases

    Due to difficulty in handling and the size of the shipping crate the Ovation-10 is designated Drop Ship Only (DSO).

Explanation of Options for Paragon Glass Kilns