Paragon Catalog Home

Paragon TnF 1613-3 Kiln

The Doll Kiln

List Price $1250.00

Dogwood Ceramic Supply's Discounted Price $870.00

    The Paragon TnF 1613-3 started it's life as a custom kiln designed and manufactured by Paragon for Seeley's.  Seeley's goal was to have a high fire kiln capable of handling two complete porcelain dolls without the need for very high amperage electrical circuits found on much larger kilns.  The TnF 1613-3 was the produced to meet Seeley's goals, hence the nickname "The Doll Kiln".  Today the TnF 1613-3 is considered by Dogwood Ceramic Supply as the perfect entry level High Fire Kiln.  Capable of firing up to Cone 10 and equipped with the same Sentry 2.0 Controller as the kiln's bigger brothers, the TnF 1613-3 is found in many hobby studios as their entry kiln, or even a backup kiln to handle overflow and firing of single pieces in storefront and production studios.
   

Dogwood Ceramic Supply stocks the Paragon TnF 1613-3
 

Paragon TnF 1613-3 Kiln:

• Cone 10, 2350°F
• 1.75 cubic foot interior: 16 ½" wide x 13 ¼" deep
• 3" insulating firebrick on lid, bottom and walls
• Reversible brick bottom
• Full-formed galvanized steel base plate to reinforce the brick bottom
• Dust-free coating in the peepholes, both sides of the lid and the top rim of the wall bricks
• Proportional power elements in deep recessed brick groves for even heating
• One piece construction with hand lifts.
• Basic operating instructions silk screened on control panel
• Heavy duty kiln stand accommodates the Orton KilnVent
• Sentry 2.0 12-Key Digital Controller with programmed cool-down and full range of user programmable firing options
• 6,400 watts of power.  Requires #10 wire, 30 amp circuit breaker, NEMA 6-30R receptacle
• Certified to CSA and UL Standard 499
• Single Zone K Type Thermocouple temperature sensor and control
• Available in 200, 208, 220, 240, 480v, 1 & 3 phase power options
• Doorway clearance required is 26"
• Shipping weight 171 lbs.

Paragon TnF 1613-3 Kiln Options:

• Furniture Kit
  • 2 C-18 Shelves (15" round x 5/8" thick)
  • 1 C-18H 1/2 Shelf (15" Half round x 5/8" thick)
  • 1” wide Square Posts, 4 of each: ½”, 1”, 2”, 3”, 4”, 6” lengths
  • 1 lb. Bag Kiln Wash
  • Furniture Kit Shipping Weight: 28 lbs.
• Deluxe stand on casters
• Orton Vent Master down draft ventilation system
• Auxiliary Output to control Orton KilnVent
• S Type Thermocouple temperature sensor and control
• APM Elements

Prices valid until December 31, 2008.

Prices:
    $1250.00 is the Manufacturer's Suggested Retail Price.  Dogwood Ceramic Supply's discounted price is $870.00.

    All options have appropriate discounts applied from the MSRP.

    Freight charges are based upon the customer's location.  Please refer to Paragon freight information for complete information including special rates and any adjustments to the basic freight charges for your specific location.  The standard freight charges includes Liftgate service, the furniture kit and most common accessories that may be added to a kiln purchase.

    For kilns shipped without the matching furniture kit the freight charges must be hand computed and are typically $30 to $80 higher than the published freight rates.

Liftgate delivery is always included in the shipping costs for kilns that are drop shipped from the Paragon factory.

Call for prices on multiple kiln purchases

    The TnF 1613-3 is stocked by Dogwood Ceramic Supply for over the counter purchase by local and regional customers.  The shipping crate is approximately 30"w x 35"d x 33"h.  The kiln will fit into every SUV or vans. The in-store price ($950.00) is slightly higher than the drop shipped price due to warehouse and handling costs, however there are no freight charges for over the counter purchases from The Showroom inventory.  The price of the accessories remains the same as the drop ship prices.

Explanation of Options for Round Kilns